{"id":3931,"date":"2024-12-13T01:44:25","date_gmt":"2024-12-13T01:44:25","guid":{"rendered":"https:\/\/ppboxy.com\/?post_type=product&p=3931"},"modified":"2026-06-09T06:04:51","modified_gmt":"2026-06-09T06:04:51","slug":"ice-cold-seafood-box","status":"publish","type":"product","link":"https:\/\/ppboxy.com\/ar\/product\/ice-cold-seafood-box\/","title":{"rendered":"Ice Cold Seafood Box"},"content":{"rendered":"

Ice Cold Seafood Box \u2014 Built for 0\u20134\u00b0C Iced Fresh Transport<\/h2>\n

An\u00a0ice cold seafood box<\/strong>\u00a0is a waterproof, reusable shipping container engineered specifically for\u00a0iced-fresh seafood<\/strong>\u00a0\u2014 products stored at\u00a00\u20134\u00b0C<\/strong>\u00a0using crushed ice or gel packs rather than mechanical refrigeration or blast freezing. Unlike frozen-seafood packaging (designed for \u221220\u00b0C static storage) or general fresh-seafood boxes (designed for ambient or lightly chilled conditions), an ice cold box must solve one challenge that no other packaging faces:\u00a0continuous ice-melt water management over 24\u201372 hours of transit<\/strong>.<\/p>\n

Every kilogram of ice packed with seafood becomes roughly one liter of meltwater within hours. That water must drain away from the product \u2014 without leaking onto pallets below \u2014 while the remaining ice continues to keep the catch at food-safe temperature. PPBOXY’s Ice Cold Seafood Box is purpose-built for this exact cycle:\u00a0load with ice \u2192 seal \u2192 stack \u2192 drain meltwater \u2192 replenish ice \u2192 repeat<\/strong>.<\/p>\n

Specifications<\/h2>\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n
Attribute<\/th>\nValue<\/th>\n<\/tr>\n<\/thead>\n
\u0627\u0644\u0645\u0648\u0627\u062f<\/td>\nPolypropylene (PP) corrugated hollow sheet \/ PP honeycomb sheet<\/td>\n<\/tr>\n
Food Contact Grade<\/td>\nFDA 21 CFR 177.1520 \/ EU 10\/2011 \/ GB 4806.7<\/td>\n<\/tr>\n
Wall Type<\/td>\nTwin-wall fluted sheet \/ Honeycomb sheet (optional)<\/td>\n<\/tr>\n
\u0633\u0645\u0627\u0643\u0629 \u0627\u0644\u0635\u0641\u064a\u062d\u0629<\/td>\n3 mm, 4 mm, 5 mm (twin-wall) \/ 5 mm, 8 mm (honeycomb)<\/td>\n<\/tr>\n
Temperature Range<\/td>\n\u221220 \u00b0C to +80 \u00b0C (operational); optimized for 0\u20134 \u00b0C iced transport<\/td>\n<\/tr>\n
Insulation<\/td>\nTwin-wall (standard) \/ Honeycomb (+25\u201330% vs twin-wall)<\/td>\n<\/tr>\n
Waterproof Rating<\/td>\n100% waterproof (closed-cell PP)<\/td>\n<\/tr>\n
Drain Ports<\/td>\nIntegrated (bottom-center \/ dual-side \/ perforated base \/ custom)<\/td>\n<\/tr>\n
Drain Port Caps<\/td>\nPress-fit caps included (seal for dry mode)<\/td>\n<\/tr>\n
Melt Rate Reduction<\/td>\nUp to 30% slower ice melt vs open-top EPS (twin-wall) \/ 40% (honeycomb)<\/td>\n<\/tr>\n
Stack Height<\/td>\n8\u201310 layers (standard), 4\u20136 layers (live product)<\/td>\n<\/tr>\n
\u0625\u0645\u0643\u0627\u0646\u064a\u0629 \u0625\u0639\u0627\u062f\u0629 \u0627\u0644\u0627\u0633\u062a\u062e\u062f\u0627\u0645<\/td>\n50\u2013200+ cycles depending on duty level<\/td>\n<\/tr>\n
Fold-Flat Volume Reduction<\/td>\n75\u201380%<\/td>\n<\/tr>\n
Standard Sizes<\/td>\n400\u00d7300\u00d7150 mm to 1200\u00d7800\u00d7400 mm<\/td>\n<\/tr>\n
Custom Sizes<\/td>\nAvailable (300+ standard molds + fully custom)<\/td>\n<\/tr>\n
Colors<\/td>\n15+ stock colors; custom Pantone matching<\/td>\n<\/tr>\n
\u0627\u0644\u0637\u0628\u0627\u0639\u0629<\/td>\nScreen print (standard) \/ digital print (Corona-treated)<\/td>\n<\/tr>\n
ISPM-15<\/td>\nExempt (solid plastic, no wood content)<\/td>\n<\/tr>\n
\u0642\u0627\u0628\u0644\u064a\u0629 \u0625\u0639\u0627\u062f\u0629 \u0627\u0644\u062a\u062f\u0648\u064a\u0631<\/td>\n100% PP recyclable<\/td>\n<\/tr>\n
\u0627\u0644\u0634\u0647\u0627\u062f\u0627\u062a<\/td>\nFDA \/ EFSA \/ EU 10\/2011 \/ GB 4806.7 \/ ISO 9001<\/td>\n<\/tr>\n
\u0627\u0644\u062d\u062f \u0627\u0644\u0623\u062f\u0646\u0649 \u0644\u0643\u0645\u064a\u0629 \u0627\u0644\u0637\u0644\u0628<\/td>\nContact for details<\/td>\n<\/tr>\n
\u0641\u062a\u0631\u0629 \u0627\u0644\u062a\u0633\u0644\u064a\u0645<\/td>\n7\u201315 business days (standard); 3\u20135 days (stock sizes)<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n

The Ice-Melt Challenge: Why Ordinary Boxes Fail<\/h3>\n

Traditional seafood packaging breaks down at the exact point where ice cold conditions are most demanding:<\/p>\n\n\n\n\n\n\n\n\n\n
Failure Mode<\/th>\nEPS Styrofoam<\/th>\nWaxed Cardboard<\/th>\nPP Corrugated (Ice Cold Box)<\/th>\n<\/tr>\n<\/thead>\n
Meltwater absorption<\/td>\n\u26a0\ufe0f Seams absorb \u2192 structural loss<\/td>\n\u274c Walls absorb \u2192 box collapses<\/td>\n\u2705 Zero absorption; stays rigid<\/td>\n<\/tr>\n
Drainage<\/td>\n\u274c No drain ports; water pools<\/td>\n\u274c No drainage; soggy bottom<\/td>\n\u2705 Integrated drain ports; self-draining<\/td>\n<\/tr>\n
Re-icing in transit<\/td>\n\u274c Must open box \u2192 break cold chain<\/td>\n\u274c Box too wet to reseal<\/td>\n\u2705 Drain without opening \u2192 ice replenished through top<\/td>\n<\/tr>\n
Stack weight on wet box<\/td>\n\u274c Cracks under load when wet<\/td>\n\u274c Compresses when saturated<\/td>\n\u2705 No deformation wet or dry<\/td>\n<\/tr>\n
After 24h in meltwater<\/td>\n\u274c Seams split; beads detach<\/td>\n\u274c Disintegrates<\/td>\n\u2705 Identical to dry condition<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n

How PPBOXY’s Ice Cold Seafood Box Manages the Melt Cycle<\/h3>\n

The ice-melt cycle in a PPBOXY Ice Cold Seafood Box works in four continuous stages:<\/p>\n

    \n
  1. Pack<\/strong>\u00a0\u2014 Layer product with crushed ice or gel packs inside the waterproof box. The twin-wall PP construction provides passive insulation, slowing ice melt by up to\u00a030% compared to open-top EPS containers<\/strong>.<\/li>\n
  2. Seal & Ship<\/strong>\u00a0\u2014 Close the lid. Meltwater flows downward through the product bed \u2014 washing and chilling simultaneously \u2014 and exits through\u00a0integrated drain ports<\/strong>\u00a0at the base or sides. No need to open the box during transit.<\/li>\n
  3. Drain & Monitor<\/strong>\u00a0\u2014 Meltwater exits through drain ports without opening the box, so cold air stays trapped and internal temperature remains in the\u00a00\u20134\u00b0C safe zone<\/strong>. External temperature indicators or RFID loggers can be mounted on the lid for compliance documentation.<\/li>\n
  4. Replenish & Repeat<\/strong>\u00a0\u2014 At distribution hubs, add fresh ice through the top opening. The box is already empty of standing water (drained), so new ice directly contacts the product.\u00a0No drying step needed<\/strong>\u00a0\u2014 unlike cardboard that must be replaced after a single wet cycle.<\/li>\n<\/ol>\n

    Ice Cold vs Frozen vs Fresh: Which Seafood Box Do You Need?<\/h2>\n

    Not all “cold” means the same thing in seafood logistics. The temperature range and preservation method determine the right box:<\/p>\n\n\n\n\n\n\n\n\n\n\n\n\n\n
    Criterion<\/th>\nIce Cold Box (This Page)<\/strong><\/th>\nFrozen Shipping Box<\/strong><\/th>\nFresh Seafood Box<\/strong><\/th>\n<\/tr>\n<\/thead>\n
    Temperature<\/strong><\/td>\n0\u20134\u00b0C (iced)<\/td>\n\u221220\u00b0C (blast frozen)<\/td>\n0\u201310\u00b0C (ambient\/cool)<\/td>\n<\/tr>\n
    Preservation method<\/strong><\/td>\nCrushed ice or gel packs<\/td>\nMechanical freezing<\/td>\nCold room \/ cool pack<\/td>\n<\/tr>\n
    Core challenge<\/strong><\/td>\nMeltwater management<\/td>\nTemperature maintenance<\/td>\nMoisture & bacteria<\/td>\n<\/tr>\n
    Drainage needed<\/strong><\/td>\n\u2705 Yes \u2014 continuous meltwater<\/td>\n\u274c No ice = no melt<\/td>\n\u26a0\ufe0f Optional (condensation)<\/td>\n<\/tr>\n
    Insulation<\/strong><\/td>\nTwin-wall or honeycomb<\/td>\nDouble-wall insulated<\/td>\nSingle-wall standard<\/td>\n<\/tr>\n
    Typical product<\/strong><\/td>\nFresh whole fish, shellfish, sashimi-grade<\/td>\nFrozen fillet blocks, IQF shrimp<\/td>\nDried, cured, or lightly chilled seafood<\/td>\n<\/tr>\n
    Re-icing en route<\/strong><\/td>\n\u2705 Yes \u2014 at each hub<\/td>\n\u274c Not applicable<\/td>\n\u26a0\ufe0f Rarely<\/td>\n<\/tr>\n
    Best for<\/strong><\/td>\nAuction houses, wet markets, HORECA<\/td>\nExport, long-haul, cold storage<\/td>\nShort-distance distribution<\/td>\n<\/tr>\n
    Learn more<\/strong><\/td>\nYou are here<\/td>\nFrozen Fish Shipping Box<\/a><\/td>\nFresh Seafood Packaging Box<\/a><\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n

    Key Features of the Ice Cold Seafood Box<\/h2>\n

    Integrated Drain Ports for Ice-Melt Management<\/h3>\n

    Every PPBOXY Ice Cold Seafood Box includes\u00a0factory-cut drain ports<\/strong>\u00a0positioned at the base or lower sidewalls \u2014 exactly where meltwater collects. Unlike aftermarket drilling (which creates sharp edges and weakens the structure), our integrated ports are\u00a0clean-sealed during die-cutting<\/strong>\u00a0for smooth edges and zero structural compromise. Available configurations:<\/p>\n\n\n\n\n\n\n\n
    Drain Port Style<\/th>\n\u0627\u0644\u0623\u0641\u0636\u0644 \u0644\u0640<\/th>\nFlow Rate<\/th>\n<\/tr>\n<\/thead>\n
    Bottom center (single)<\/td>\nSmall boxes, single-species lots<\/td>\n~2 L\/min<\/td>\n<\/tr>\n
    Dual side ports (left + right)<\/td>\nLarge boxes, mixed loads<\/td>\n~4 L\/min total<\/td>\n<\/tr>\n
    Perforated base panel<\/td>\nShellfish (needs full-base drainage)<\/td>\n~6 L\/min<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n

    All drain ports can be\u00a0plugged with press-fit caps<\/strong>\u00a0for dry transport or retail display \u2014 one box, two modes.<\/p>\n

    Twin-Wall & Honeycomb Insulation Options<\/h3>\n

    PPBOXY offers two sheet constructions for ice cold boxes, each optimized for different transit durations:<\/p>\n\n\n\n\n\n\n
    Construction<\/th>\nInsulation Value<\/th>\n\u0627\u0644\u0623\u0641\u0636\u0644 \u0644\u0640<\/th>\nWeight<\/th>\n<\/tr>\n<\/thead>\n
    Twin-wall fluted sheet<\/strong>\u00a0(3\u20135 mm)<\/td>\nStandard insulation<\/td>\nShort-haul (6\u201312 h)<\/td>\nLighter<\/td>\n<\/tr>\n
    PP honeycomb sheet<\/strong>\u00a0(5\u20138 mm)<\/td>\nEnhanced insulation (+25\u201330% vs twin-wall)<\/td>\nLong-haul (24\u201372 h)<\/td>\nHeavier but stronger<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n

    \u0627\u0644\u0640\u00a0PP honeycomb construction<\/strong>\u00a0is exclusive to this product line \u2014 no other PPBOXY seafood box offers it. The hexagonal cell structure traps a layer of still air between the inner and outer walls, providing superior thermal resistance without adding solid material weight. This makes it ideal for\u00a0export shipments<\/strong>\u00a0where ice must last 48+ hours without replenishment.<\/p>\n

    Food-Contact Safe (FDA \/ EFSA \/ EU 10\/2011)<\/h3>\n

    All PPBOXY ice cold seafood boxes are manufactured from\u00a0food-grade polypropylene<\/strong>\u00a0compliant with:<\/p>\n